slap_streams is a server for Durable Streams, an HTTP protocol for append-only streams of messages. Clients read a stream from an offset, and resume from their last offset after a disconnect or restart.

slap_streams stores streams in SlateDB, and acknowledges an append only once it is durably stored in object storage. It passes the official Durable Streams conformance suite, and is built on top of slap_cluster and slap_slatedb.

Use slap_streams to deliver a sequence of messages to clients. For example, an application can append a document's changes to a stream, and each client keeps reading from its last offset. The package handles durable appends, reads by offset, waits for new messages, producer deduplication, stream expiry, and forks. It does not define your message format or apply messages to your application's state.

slap_streams runs inside your application, on one node or several. You start Slap.Streams.Cluster, call Slap.Streams in-process, and can mount Slap.Streams.HTTP.Router in your Plug pipeline. Streams are divided among SlateDB databases called shards, and a call for a stream goes to the node that owns its shard.

The slap package's standalone server script serves slap_streams over HTTP.

Section numbers (§) in the API documentation refer to the Durable Streams specification.

About Slap

This package is part of Slap.

Slap provides Elixir bindings for SlateDB (an embedded key-value engine optimized for storing data in object storage), as well as services built on top of these bindings. The services run inside your application, on one node or several.

Services:

  • slap_streams: a Durable Streams server, with HTTP, long polling, and SSE
  • slap_kv: partitioned key-value storage with conditional writes, ordered scans, and an HTTP API
  • slap_files: file storage with metadata and conditional replacement; small files are kept in slap_kv records, which saves object-store PUTs
  • slap_yjs: Yjs documents for collaborative editing, with replication and presence across nodes

Building blocks:

  • slap_slatedb: the SlateDB bindings
  • slap_cluster: SlateDB databases run as shards across nodes, with placement, routing, and failover
  • slap_snapshot_log: an append-only log of changes that can be condensed into snapshots

All-in-one:

  • slap: all Slap server libraries, and Slap, which starts the services you select under one supervisor

Inspection:

  • slap_inspect: a read-only TUI and CLI for browsing Slap data; installed separately

The slap package pulls in all seven server libraries. If you only need a subset, add those packages directly.

Installation

Requires Elixir 1.18 or later.

To depend on slap_streams directly, add it to the dependencies in your application's mix.exs:

defp deps do
  [
    {:slap_streams, "~> 0.6.1"}
  ]
end

Run mix deps.get. API documentation is on HexDocs.

Example

In an application that depends on slap_streams, run this in iex -S mix with a fresh local directory. The in-process API is Slap.Streams:

iex> {:ok, _} = Slap.Streams.Cluster.start_link(store: {:local, "/tmp/slap-streams"}, shards: 1); :ok
:ok

iex> {:ok, :created, %{next_offset: 0}} = Slap.Streams.create("/chat/1", content_type: "application/json"); :created
:created
iex> {:ok, %{result: :appended, next_offset: 12}} =
...>   Slap.Streams.append("/chat/1", ~s([{"m": 1}]), producer: {"client-a", 0, 0}); {:appended, 12}
{:appended, 12}
iex> {:ok, %{messages: messages, up_to_date: true}} = Slap.Streams.read("/chat/1", 0); messages
[{0, "{\"m\": 1}"}]

The functions return protocol results, not HTTP responses; Slap.Streams documents the HTTP status for each result. The next offset is 12 because the JSON element occupies eight bytes and each message adds four bytes of overhead. Offsets in Slap.Streams are these integers; over HTTP they use the official wire format, and Slap.Streams.Offset converts between the two.

Embedding

Add Bandit to the host application's dependencies. Then add these children to its supervision tree, with the cluster first:

children = [
  {Slap.Streams.Cluster, store: {:local, "/tmp/slap-streams"}, shards: 1},
  {Bandit, plug: Slap.Streams.HTTP.Router, port: 4437, ip: :loopback}
]

Bandit serves the router at /v1/stream/. ip: :loopback accepts connections from this machine only; without ip:, Bandit listens on every interface. For local storage, see choosing the shard count; before running a script against a store an application is using, see running another cluster on the same store. Using S3 describes remote storage.

To use an application-owned cluster module:

defmodule MyApp.StreamsCluster do
  use Slap.Streams.Cluster, otp_app: :my_app
end

children = [{MyApp.StreamsCluster, store: {:local, "/tmp/slap-streams"}, shards: 1}]

Add these children to your supervision tree. Once it is running, pass the cluster module to each operation:

{:ok, :created, _} = Slap.Streams.create("/notes", cluster: MyApp.StreamsCluster)

Pass cluster: MyApp.StreamsCluster to the router and to any Slap.Yjs.Docs instance using it. Run one Streams cluster per VM: metrics and the HTTP request-body budget are shared across the VM. A KV cluster can run on the same VM.

Mounting the router in an application

A stream's name is its full request path, including any path the router is mounted under. Served at the root, the stream at /v1/stream/chat/1 is Slap.Streams.head("/v1/stream/chat/1") in-process. Mounted under /streams, the same stream is at /streams/v1/stream/chat/1, and that is its name.

The router reads the request body itself, so it must run before Plug.Parsers. After it, a request whose content type Plug.Parsers parses reaches the router with its body already read. With Phoenix's default parsers (JSON, URL-encoded and multipart), an append to a JSON stream then gets 400 ("empty body not allowed"). A Phoenix router runs after the endpoint's Plug.Parsers, so mount the Streams router in the endpoint, with a function plug placed before plug Plug.Parsers:

# In MyAppWeb.Endpoint, before `plug Plug.Parsers`:
plug :streams

@streams Slap.Streams.HTTP.Router.init([])

defp streams(%Plug.Conn{path_info: ["streams" | rest]} = conn, _opts),
  do: conn |> Plug.forward(rest, Slap.Streams.HTTP.Router, @streams) |> halt()

defp streams(conn, _opts), do: conn

In a Plug.Router that has no Plug.Parsers before it, forward "/streams", to: Slap.Streams.HTTP.Router does the same.

Using S3

Create the bucket first and configure AWS_REGION and credentials in the environment used to start the application, for example with AWS_ACCESS_KEY_ID and AWS_SECRET_ACCESS_KEY. In an application that depends on slap_streams, start a fresh iex -S mix session and open a cluster on a new prefix in that bucket:

iex> {:ok, _} = Slap.Streams.Cluster.start_link(
...>   store: {:url, "s3://my-bucket/my-app/streams"},
...>   shards: 8
...> ); :ok
:ok

iex> {:ok, :created, _} = Slap.Streams.create("/notes", content_type: "text/plain"); :created
:created
iex> {:ok, %{result: :appended}} = Slap.Streams.append("/notes", "hello"); :appended
:appended
iex> {:ok, %{messages: messages}} = Slap.Streams.read("/notes", 0); messages
[{0, "hello"}]

Use the same store URL and shard count when restarting the application. In a supervised application, put Slap.Streams.Cluster in the supervision tree as shown above. The example uses the default local placement on one node; see Several nodes to run on several nodes.

A failed store probe normally prevents the cluster and its supervising application from starting. With probe: :background, the cluster starts without shards and retries the probe. Operations return {:error, :unavailable} until the shards open.

Before boot work that needs every shard, call Slap.Streams.Cluster.await_ready(30_000) and handle {:error, :timeout}. Slap.Streams.Cluster.status() reports current readiness and the latest failures without accessing storage; see cluster readiness.

Flush interval

A durable append waits for SlateDB to flush its write-ahead log (WAL) to object storage. Slap.Streams.Cluster sets flush_interval to 10 ms; SlateDB's default is 100 ms. Pass settings: %{flush_interval: "50ms"} to change it. Other settings leave the 10 ms default intact.

Lower intervals reduce the wait for acknowledgements but increase object-store PUTs. Each shard with pending writes can issue up to one WAL PUT per interval; idle shards issue none. Choose the interval for the expected write rate, shard count, and store pricing. For :memory and {:local, dir} tests, settings: %{flush_interval: "2ms"} reduces the wait without request charges.

How it works

  • Placement. A stream lives on shard xxh64(key) mod N, where key is its placement key (see Several nodes) and N is the shard count. Each shard runs one process per active stream, its stream server. A stream server starts on demand and stops after 5 idle minutes.
  • Writes. A stream server validates each write against the Durable Streams protocol and assigns offsets. It writes the messages, the new tail, producer state, and any metadata change in one Slap.SlateDB.write/3 batch. It does not wait for that write to become durable before handling the next request, so several writes can be in flight at once.
  • Acknowledgements. The server replies once SlateDB reports the write durable. Replies go out in request order. A reply that does not need a write (an error, a duplicate, or "already exists") still waits behind the writes in flight, so no reply depends on state that could still be lost.
  • Reads. The server keeps a durable view that advances only as writes become durable. Reads, head, long-polls, and SSE see only that view, so they never return data before it is durable. The read itself runs in the caller's process.
  • Failures. A failed write fails that request and every request in flight, and the stream server stops. The next request reloads the stream from storage. When a shard stops or is fenced, its stream servers stop first and fail requests in flight with :unavailable.

HTTP

Slap.Streams.HTTP.Router is a Plug over Slap.Streams. Streams live under /v1/stream/, and a stream's name is the request path. By default the router matches the official Go server: the same headers, status codes, cursors, CORS headers, and security headers. For HTTP request examples, see slap.

  • Reads return up to about 1 MiB. Stream-Up-To-Date is set on a read that reached the tail, and Stream-Closed is set only on the read that returns a closed stream's final data. The ETag is "sid:start:end" (with :c when closed), and a request with a matching If-None-Match gets 304.
  • Caching. Historical reads are cacheable (public, max-age=60, stale-while-revalidate=300). Reads at offset=now and HEAD requests are no-store.
  • Long-poll. A long-poll request waits for new data for up to 30 s, then gets 204. The stream server notifies it of new data, so nothing polls.
  • SSE sends each data event and its control event in one chunk. Streams that are not text or JSON are sent as base64. The response ends after 60 s, or at the end of a closed stream.
  • TTL and Expires-At. Reads, waits, and writes reset a sliding TTL; HEAD does not. Lifecycle describes when expired streams are deleted.
  • Forks are created with the Stream-Forked-From, Stream-Fork-Offset, and Stream-Fork-Sub-Offset headers, which are parsed as the Go server parses them.

Router options

OptionDefaultEffect
:long_poll_timeout30,000 msHow long a long-poll waits for data.
:sse_timeout60,000 msHow long an SSE response stays open.
:max_read1 MiBAbout how many bytes one read returns.
:max_body64 MiBThe largest request body. A larger Content-Length gets 413 before the body is read.
:max_path512 bytesThe longest stream path (414 above it).
:max_buffered512 MiBRequest-body bytes the VM holds at once (503 above it).
:trust_forwardedfalseBuild a created stream's Location from X-Forwarded-Proto and X-Forwarded-Host.
:private_cachefalseSend Cache-Control: private instead of public.
:cors"*"The allowed origin, or false to omit CORS headers.

Authentication

The router does not authenticate requests or limit their rate. Put both in your application's pipeline or in a proxy in front of it. Two things to cover:

  • A path-based access check must authorize both the target path and the Stream-Forked-From source of a PUT: a fork reads data from its source.
  • Set :private_cache, so that a CDN does not serve one user's historical reads to another.

Backpressure

An append gets 503 with Retry-After: 1 if it would take a stream's bytes in flight (written but not yet durable) over 64 MiB, or its shard's over 256 MiB. A stream with nothing in flight always accepts one request. Set the limits with the cluster child_options keys :max_inflight_bytes_per_stream and :max_inflight_bytes_per_shard.

Metrics

Slap.Streams.Telemetry emits telemetry events for:

  • append latency, from accepting the request to the durable reply
  • rejected appends and write failures
  • HTTP requests
  • each shard's load, every 5 s: stream servers, bytes and requests in flight, waiters, pending deletions and expiries, and SlateDB's L0 SSTs, sorted runs, and block cache hits

Slap.Streams.Metrics keeps these, together with slap_cluster's durability lag and shard events, as Prometheus metrics; its documentation lists them. Slap.Streams.HTTP.Metrics is a Plug that serves them in the Prometheus text format. Mount it where Prometheus can reach it and the public cannot.

Lifecycle

  • Forks. A fork starts with its source's durable messages before the fork offset, from the source's trim point on. These messages are the fork's inherited range. Creating a fork does not copy them, so creation time does not depend on how many messages the fork inherits. (With a fork sub-offset on a byte stream, it copies the first bytes of the message at the fork offset.) The fork reads its inherited range from its source's storage. Those reads need the source's shard to be available, and the shards of the source's own sources if it is a fork; they do not start stream servers there. Reads of the fork's own messages need only its shard. A fork inherits TTL or Expires-At unless it sets its own.
  • Fork depth. A fork's depth is its source's depth plus one, or zero when its inherited range is empty. Other streams, including copies, have depth zero. :max_fork_depth in cluster child_options (default 8) limits it; a deeper fork returns {:error, {:bad_request, :max_fork_depth_exceeded}} (HTTP 400).
  • Copies. Slap.Streams.copy/3 writes the source's messages into a new stream with its own storage, at the same offsets. Use a fork when the source's shards will stay available: it does not copy the inherited messages. Use a copy when the new stream must not depend on its source: a completed copy reads only its own shard and does not keep its source's messages, and it can be forked to start a new chain of forks. A copy takes time and storage proportional to the messages it copies. Copies are available only in-process.
  • Interrupted creation. A fork or copy stays hidden until it is active. Lists omit it, and HEAD, reads, appends, and forks or copies from it return :unavailable. A copy writes pages from the calling process until its :timeout (default 30 s), so a large copy can need several calls. When a create or copy returns {:error, :timeout} or another error, the target can stay pending with the progress made so far. Call it again with the same arguments to continue; it returns {:ok, :exists, info} if the earlier call finished after returning. Once a call has selected the inherited range, retries keep it, even if the source changes or is deleted. Delete a pending target to cancel its creation.
  • Deletes. Deleting a stream that has forks or pending copies soft-deletes it: reads return 410 and creating a stream at its path returns 409, while its forks and pending copies can still read their inherited ranges. A deleted fork keeps its own inherited range while forks made from it exist. Long-polls woken by deletion return :deleted through the Elixir API.
  • Expiry. Every 10 s (:expiry_interval), a background job asks each stream past its deadline to check expiry and delete itself if expired. Public requests also check expiry; internal retention and cleanup requests do not. Sliding-TTL access times are persisted at most once per tenth of the TTL.
  • Repair. Every minute (:repair_interval), repair cancels forks pending for longer than :creation_grace (default one hour) and copies that have copied no page for that long. It also releases inherited ranges that no stream needs any more. A range whose fork or copy is on an unreachable shard stays until repair can check it. Repair reads durable metadata, and starts a stream server only when it needs to write.
  • Deleting messages. Background deletion removes messages in pages of 10,000 rows and resumes after a crash.
  • Trim. Slap.Streams.trim(path, offset) makes reads below offset return 410 (:trimmed). HTTP reads from -1 (Elixir :start) start at the trim point. Background cleanup deletes only the messages below both the trim point and the start of every inherited range that other streams hold on this stream. Trimming a fork does not shrink its inherited range. Trim is available only in-process.
  • List. Slap.Streams.list(prefix) returns paths starting with prefix in its placement group, such as a Yjs document's .snapshots/. It is available only in-process.
  • Seal. Slap.Streams.seal(group) permanently prevents new streams in a placement group. Once it returns, creating a stream, fork or copy in that group returns {:error, :sealed} (409) without reserving the target. A fork or copy that was already pending is removed when it tries to become active, and that call returns {:error, :sealed}. Existing streams are unchanged, and a retry of a creation that had already completed returns {:ok, :exists, info}. slap_snapshot_log seals a deleted log's group to prevent pending snapshot writes from creating new streams. Seal is available only in-process.

Upgrading existing stream stores

Stores written by 0.4.0 and earlier need an offline upgrade before starting this version. In 0.4.0 and earlier, a fork copied its source's messages; the upgrade turns those forks into streams that are not forks. Before upgrading, finish or delete forks that the old version is still creating.

Stop every node using the store and take a backup. With the new package installed, save this invocation as upgrade_streams.exs. Supply all stream shards using their existing paths and store configuration:

shard_paths = ["streams/shard-000", "streams/shard-001"]
store = {:local, "/path/to/existing/store"}

dbs =
  Enum.map(shard_paths, fn path ->
    {:ok, db} = Slap.SlateDB.open(path, store: store)
    db
  end)

try do
  :ok = Slap.Streams.Upgrade.run(dbs)
after
  Enum.each(dbs, fn db -> :ok = Slap.SlateDB.close(db) end)
end

Run mix run --no-start upgrade_streams.exs before restarting the cluster. Slap.Streams.Upgrade.run/1 reads trusted stored ETF records; do not supply external input. It checks every shard before writing and converts metadata in durable batches. On failure, close and reopen the handles before retrying; converted records are skipped. Once conversion starts, use the new version or restore the backup before returning to the old version.

The upgrade preserves message rows, offsets, trim, producer state, Stream-Seq, expiry and closed state. Background cleanup finishes old deletion and trim work after the cluster restarts. Sources no longer keep messages for forks made by the old version, which hold their own copies.

Storage after deletes

Deleting rows writes tombstones. SlateDB reclaims their space only after compaction and garbage collection; old sorted runs and checkpoints can delay reclamation. bench/storage_soak.exs measures storage reclamation on local and remote stores.

Several nodes

With a placement strategy, slap_cluster spreads the shards over several nodes and moves them when nodes join, leave, or fail. Connect the nodes with distributed Erlang. Any way of connecting them works, such as libcluster, DNS-based discovery in Kubernetes, your own Node.connect/1 calls, or Slap.Cluster.Peers for a fixed list of nodes. Any node can serve any request:

{Slap.Streams.Cluster, store: {:url, "s3://streams/ds"}, shards: 64,
             strategy: {Slap.Cluster.Strategy.ObjectLease, lease_ttl: 15_000}}
  • Routing. Slap.Streams runs each operation on the shard's owner with Slap.Cluster.call/4. If the owner cannot be reached, or does not answer within the request's timeout plus 5 s, the request gets 503, and it may or may not have been applied. Retries from idempotent producers are deduplicated. A call is retried on another node only if it was never sent.
  • Long-poll and SSE. The HTTP process on the node that received the request registers with the owner's stream server, which notifies it of new data; the process then reads from the owner. If the owner's stream server or its node dies, the request ends with 503 instead of waiting for its timeout.
  • Forks use the same routing, so a fork and its source can be on different shards and nodes.
  • Placement key. A stream's placement key is its path up to the first segment that starts with . (Slap.Streams.placement_key/1). So a Yjs document's .updates, .index, and .snapshots/... streams (slap_yjs) are on one shard. The :placement_key option of Slap.Streams overrides it.

Placement strategies and consistency

Any of slap_cluster's strategies works (the cluster's :strategy option):

  • ObjectLease stores leases as objects in the streams' bucket, so it needs S3 or another store with If-Match. An owner stops its shards before its lease expires, and the next owner claims them only after, so reads and writes are linearizable.
  • Distributed uses no leases: every node computes the placement from the connected nodes. Lower net_ticktime for faster failover of a node that stops answering.
  • Static uses a fixed list of nodes; Local runs on one node.

Without leases, reads are not linearizable. A node that was paused, or that disagrees with others about which nodes are connected, may serve reads from its old state until it finds that SlateDB has fenced it (about a second). Its writes fail with 503, because SlateDB rejects writes from a fenced writer. Before it reports a producer sequence gap, it confirms its ownership with a write, so that reply also gets 503. The Jepsen suite checks both kinds of placement.

Storage

Offsets use the official wire format (%016d_%016d) and advance by four bytes plus the body length per message. An append stores its messages, tail, producer state, and metadata changes in one SlateDB batch. JSON mode keeps each array element's original bytes.

Tests

Follow the repository's development setup, then run from slap_streams/:

mix test                          # SLAP_STREAMS_PROP_RUNS=1000 for more model sequences

The model test covers stream operations, crashes, and clock changes against a pure protocol model. Set SLAP_STREAMS_PROP_RUNS to run more sequences; SLAP_STREAMS_PROP_STATS=1 prints outcome counts.

The tests that need the server as an OS process live in slap: the official Durable Streams conformance suite and benchmarks, the crash tests and the cluster tests.

Benchmarks

Run these scripts from slap_streams/ after the development setup above:

mix run bench/append_latency.exs
mix run bench/read_scaling.exs
mix run bench/forks_and_copies.exs

These measure the library in-process. slap runs the official Durable Streams HTTP benchmarks and an HTTP append load test against a running server.

bench/append_latency.exs measures durable append latency on the in-memory store. Set SLAP_BENCH_FLUSH_INTERVAL to change SlateDB's flush interval.

bench/forks_and_copies.exs measures fork creation and copies for 1 KiB, 64 MiB and 1 GiB prefixes, reads through chains of forks, and fork reads after the source is trimmed. It uses an in-memory store and prints JSON results.

bench/read_scaling.exs times first server reads, warm random reads, and narrow and broad lists as stream count grows. It also times reads at the start, middle, and tail of a growing stream. It uses one shard, flushes data before timing, and reports p50, p99, and maximum latency. The first server reads include process startup and state loading; the other operations use warmed paths. The default store is a temporary local directory, removed after the run. Use a fresh object-store prefix to measure that backend:

mix run bench/read_scaling.exs -- --streams 1000 --messages 1024 --samples 200 \
  --cache disabled --store s3:s3://bucket/read-bench

Increase --streams, --messages, or --message-bytes to test larger stores. --cache disabled turns off SlateDB's in-memory cache; operating-system and object-store caches may still affect results. --page-bytes and --flush-interval control read size and SlateDB's flush interval. --store memory avoids local and object-store I/O. Object-store data remains after the run and must be removed separately.

License

Slap is released under the terms of the Apache License 2.0.

Copyright (c) 2026, Michael Russo.